corresponding mobility grade of the patient. The configured activity mode can only be changed by
qualified personnel.
The product features the "Bicycle ergometer" MyMode. It has default values configured using
the adjustment software and can either be accessed automatically or via the Cockpit app (see
page 67).
In case of a product malfunction, safety mode makes restricted operation possible. Resistance
parameters that are predefined by the product are configured for this purpose (see page 81).
The microprocessor-controlled hydraulic unit offers the following advantages
•
Stability while standing and walking
•
Smooth, harmonious, quiet initiation of the swing phase
•
Automatic recognition of sitting down. Manual unlocking of the joint not required.
•
Support while sitting down with individually adaptable resistance. This resistance remains
constant during the entire process of sitting down.
•
Support while standing up. The knee joint can be loaded even before reaching full extension.
•
Approximation of the physiological gait pattern
•
Adaptation of product characteristics to various surfaces, inclines, gait situations and walking
speeds
•
Manual locking of the knee joint for use of a wheelchair (see page 78). This function makes it
possible to lock the knee joint in any extended position while sitting down. This is particularly
useful in order to keep the foot from dragging on the ground when the user is being transpor
ted in a wheelchair.
Essential performance of the product
•
Stability in the stance phase
•
Initiating the swing phase
•
Adjustable swing phase extension resistance
•
Adjustable swing phase flexion resistance
3 Intended use
3.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
3.2 Conditions of use
The product was developed for everyday use and should not be used for walking speeds over
3 km/h or unusual activities. These unusual activities include, for example, extreme sports (free
climbing, parachuting, paragliding, etc.).
Permissible ambient conditions are described in the technical data (see page 84).
The prosthesis is intended for use exclusively on the user for whom the adjustment was made.
The manufacturer does not authorise use of the prosthesis on another person.
Our components perform optimally when paired with appropriate components based upon weight
and mobility grades identifiable by our MOBIS classification information and which have appro
priate modular connectors.
Activity mode A (locked mode)
This product is recommended for mobility grade 1 (indoor walker). Approved for a
body weight of max. 125kg.
m°
kg
53