Foreword; Product Description; Function; Combination Possibilities - Otto Bock AxonSoft 2.2 560X500 V2.2 Instructions For Use Manual

1 Foreword

INFORMATION
Date of last update: 2020-09-24
Please read this document carefully before using the product and observe the safety
►
notices.
Please contact the manufacturer if you have questions about the product or in case of prob­
►
lems.
Report each serious incident in connection with the product, in particular a worsening of the
►
state of health, to the manufacturer and to the relevant authority in your country.
Please keep this document for your records.
►
The "560X500=V2.2 AxonSoft 2.2" adjustment software is referred to simply as "AxonSoft / soft­
ware / adjustment software" below.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.

2 Product description

2.1 Function

The AxonSoft software serves as a tool for adjusting the 13E500 AxonMaster and the connected
Axon-Bus prosthethic system.
Various control programmes and switching methods are available for optimum adaptation to the
patient.
Communication between the software and the prosthesis takes place exclusively via Bluetooth
data transfer.

2.2 Combination possibilities

Supported Bluetooth adapter
• 60X5 BionicLink PC

3 Intended use

3.1 Indications for use

The AxonSoft software is an accessory for the Axon-Bus prosthethic system and provides a facility
for myoelectric signal analysis as well as patient-specific adaptation of the control of Axon-Bus
components.

3.2 Conditions of use

• For the software to be able to be used, the PC must fulfil the system requirements.
• The battery in the Axon-Bus prosthethic system must be charged.

3.3 Contraindications

• All conditions which contradict or go beyond the specifications listed in the section on
"Safety" and "Indications for use".

3.4 Qualification

The adjustment software may only be used by users who have participated in the relevant product
training and have been certified for the application. Additional product training courses may
become necessary to qualify for software updates.
18