Aps Assembly Example For Mgx 8850 (Mgx-8850-Aps-Con); Figure - Cisco MGX MGX 8800 Hardware Installation Manual

Chapter 1 Product Overviews

Figure 1-14

back cards are inserted into an APS connector, they form an APS assembly. The APS assembly is
installed in the rear of the switch.
Figure 1-14
Two APS connectors are available for the MGX 8850 or MGX 8850/B switch (Cisco Part Number
MGX-8850-APS-CON or MGX-APS-CON).
support. For more information about APS options and requirements, see
Table 1-6
Module
AXSM-1-2488
AXSM-1-2488/B
AXSM-2-622-E
AXSM-4-622
AXSM-4-622/B
AXSM-8-155-E
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
shows an example of two back cards installed in the 8850 APS connector. When the two

APS Assembly Example for MGX 8850 (MGX-8850-APS-CON)

APS Connector Support for MGX 8850 or MGX 8850/B Switch Modules
MGX-8850-APS-CON
(MGX 8850 and MGX 8850/B)
1
Yes
Yes
Yes
Yes
Yes
Yes
Cisco MGX 8850 and MGX 8850/B Switches
Table 1-6 lists the modules that the APS connectors
MGX-APS-CON
(MGX 8850 only)
Yes
Yes
Yes
Yes
Yes
Yes
Cisco MGX 8800/8900 Series Hardware Installation Guide
Table 4-4.
1-29