Table 2-23 Pxm1E Leds - Cisco MGX MGX 8800 Hardware Installation Manual

Chapter 2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
Table 2-23
LED
STATUS
PORT x
Note
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
PXM1E LEDs (continued)
Status
Red
Blinking red
Blinking yellow
Blinking green
Green
Red
The number
of ports varies
Yellow
with the type
Off
of PXM1E
installed in
your system.
Description
The module is in Reset mode.
The module is booting up from boot flash. The
PXM1E prompt will appear on the screen.
The module is booting and initializing or the
module is in Standby mode.
The module is active.
The port is active with no alarms detected.
A local alarm exists on the port.
A remote alarm exists on the port.
The port is inactive or not provided.
Cisco MGX 8800/8900 Series Hardware Installation Guide
Front Cards
2-51