Chapter 6
Maintaining the Cisco MGX Switch or Gateway
Installing and Removing the AXSM-XG Extender Connector
MGX8950-EXTDR-CON Installation
Figure 6-16
Insert the mounting screws, with lock washers, from the bottom of the circuit board, through the board,
Step 4
and into the extender connector. The extender connector has captive nut that accepts the mounting screws
(see
Figure
6-17).
Cisco MGX 8800/8900 Series Hardware Installation Guide
6-28
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006