Cisco SLM248P Quick Start Manual
Smart switch
Hide thumbs
Also See for SLM248P:
- User manual (56 pages) ,
- Datasheet (5 pages) ,
- Administration manual (91 pages)
Related Manuals for Cisco SLM248P
Summary of Contents for Cisco SLM248P
-
Page 1: Quick Start Guide
Quick Start Guide Cisco Small Business SLM2048, SLM2024, SLM248G, SLM248P, SLM224G, SLM224P Smart Switch Package Contents • Smart Switch • Power Cord • Rubber feet • Quick Start Guide • Mounting Hardware • Product CD-ROM... -
Page 2: Getting To Know The Switch
Welcome Thank you for choosing the Cisco Small Business Series Smart Gigabit Switch. The Smart Switches offer the following interfaces: • The SLM2024 and SLM2048 offer twenty four (24) or forty eight (48) gigabit copper ports, with two (2) shared copper or optical (SFP) uplink interfaces for connecting the switch to the core network. - Page 3 SLM248G, SLM248P, SLM224G, and SLM224P The following section describes the SLM248G, SLM248P, SLM224G, and SLM224P switches. The front panel of the SLM248P is shown. Front Panel PoE — (Amber) Blinks to indicate that power is being supplied to a device attached to the corresponding port.
- Page 4 FX) or MFELX1 (100BASE-LX) 100SFP transceiver and use fiber optic cabling. On the SLM248G, SLM248P, SLM224G, and SLM224P switches, miniGBIC ports are shared with standard ports. If a miniGBIC port is used, the shared standard port on the switch cannot be used.
-
Page 5: Back Panel
• Make sure that the switch is accessible and that the cables can be connected easily. • Keep cabling away from sources of electrical noise, power lines, and fluorescent lighting fixtures. • Do not stack free-standing switches more than four units high. Cisco Small Business SLM Series Smart Switch Installation Guide... -
Page 6: Desktop Placement
Follow the same steps to attach the other bracket to the opposite side. After the brackets are attached to the switch, use suitable screws to securely attach the brackets to any standard 19-inch rack. Cisco Small Business SLM Series Smart Switch Installation Guide... -
Page 7: Getting Started With The Configuration
Connect a computer to an available LAN port. Start a web browser. In the address bar, enter the default IP address of the switch, http://192. 1 68. 1 .254 and press Enter. Cisco Small Business SLM Series Smart Switch Installation Guide... -
Page 8: Verifying The Hardware Installation
• Connect a computer to an available LAN port and verify that you can connect to a website on the Internet, such as www.cisco.com. If you encounter problems, consider the following: • Reset the switch to its factory default settings by holding down the reset button for 10 seconds. -
Page 9: Next Steps
The switch might have some hardware problems if the second computer also fails to establish a link, please contact technical support for further assistance. If you need help resolving a problem, visit the Cisco Small Business Support Community at www.cisco.com/go/ smallbizsupport. -
Page 10: Where To Go From Here
Cisco Small Business SLM www.cisco.com/en/US/partner/products/ Series Smart Switch ps9994/ Documentation tsd_products_support_series_home.html Cisco Small Business Cisco Partner Central for Small www.cisco.com/web/partners/sell/smb Business (Partner Login Required) Cisco Small Business Home www.cisco.com/smb Marketplace www.cisco.com/go/marketplace Cisco Small Business SLM Series Smart Switch Installation Guide... - Page 11 Cisco Small Business SLM Series Smart Switch Installation Guide...
- Page 12 Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners.