Chapter 2
Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
The MPSM-16-T1E1 card supports the features as summarized in
Table 2-21
Feature Grouping Description
General
Supported
Services
Physical Layer
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
MPSM-16-T1E1 Supported Feature Summary
•
Support for SPVCs, SVCs, SPVPs and PVPs.
Maximum of 2000 connections supported. Any combination of Frame Relay
•
and ATM connections is allowed.
Support for FR-FR, FR-ATM, ATM-FR, ATM-VISM, SPVC connection types,
•
where one of end-points resides on the MPSM-16-T1E1 card.
Support for OAM fault management.
•
Support for statistics collection and upload to Cisco Wan Manager (CWM).
•
Support for configuration upload to CWM.
•
•
1:1 hot standby redundancy plus standard MGX RAS features.
•
1:N cold standby redundancy
Connections provisioned on PNNI control plane on the MGX 8850 platform
•
using the MSF switch architecture based VSI (Virtual Switch Interface).
•
Provisioning XPVC endpoints supported on this card.
•
Licensing of the features supported by card.
•
Frame Relay
•
ATM
Inverse Multiplexing for ATM (IMA)
•
Any Service Any Port (ASAP)
•
Physical interfaces configurable as channelized or unchannelized ports for:
•
16 T1 connections
–
16 E1 connections
–
Fault management and performance management for T1 and E1 interfaces.
•
•
BERT support.
Table
Cisco MGX 8800/8900 Series Hardware Installation Guide
Front Cards
2-21.
2-43