Cable Management Assembly; Figure 1-27 Cable Management Assemblies - Cisco MGX MGX 8800 Hardware Installation Manual

Chapter 1 Product Overviews
Cisco MGX 8950 Switch

Cable Management Assembly

The cable management system consists of two identical, horizontal cable management assemblies (an
upper and a lower assembly), left-side and right-side mounting brackets, and screws.
Figure 1-27 shows the upper and lower cable management assemblies installed on the back of the MGX
8950 switch.
Figure 1-27 Cable Management Assemblies
Upper cable
management
assembly
Lower cable
management
assembly
Cisco MGX 8800/8900 Series Hardware Installation Guide
1-43
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006