Chapter 6
Maintaining the Cisco MGX Switch or Gateway
Figure 6-17
Tighten the four mounting screws.
Step 5
Removing the Extender Connector
To install the extender connector:
Remove the four mounting screws and washers from the extender connector.
Step 1
Step 2
Remove the extender connector from the board.
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
MGX8950-EXTDR-CON Assembly
Installing and Removing the AXSM-XG Extender Connector
Cisco MGX 8800/8900 Series Hardware Installation Guide
6-29