Verifying Package Contents - Cisco IE 3000 Series Hardware Installation Manual

Appendix B Installation In a Hazardous Environment
•
•
•
•
•

Verifying Package Contents

Carefully remove the contents from the shipping container, and check each item for damage. If any item
is missing or damaged, contact your Cisco representative or reseller for support. Return all packing
materials to the shipping container and save them.
The switch is shipped with these items:
•
•
•
•
To connect the switch functional ground, you need a ring terminal lug (such as Thomas & Bett part
Note
number RC10-14 or equivalent).
If you want to connect a terminal to the switch console port, you need to provide an RJ-45-to-DB-25
female DTE adapter. You can order a kit (part number ACS-DSBUASYN=) with that adapter from Cisco.
You can order a kit containing four spare latches (DINCLP-IE3000=) from Cisco.
OL-13017-01
Clearance to front and rear panels meets these conditions:
Front-panel LEDs can be easily read.
–
Access to ports is sufficient for unrestricted cabling.
–
Front-panel direct current (DC) power and relay connector is within reach of the connection to
–
the DC power source.
Airflow around the switch and through the vents is unrestricted. To prevent the switch from
overheating, there must be the following minimum clearances:
Top and bottom: 4.13 in. (105 mm)
–
Exposed side (not connected to the module): 3.54 in. (90 mm)
–
Front: 2.56 in. (65 mm)
–
Temperature surrounding the unit does not exceed 140°F (60°C).
Note When the switch is installed in an industrial enclosure, the temperature within the enclosure
is greater than normal room temperature outside the enclosure.
The temperature inside the enclosure cannot exceed 140°F (60°C), the maximum ambient
enclosure temperature of the switch.
Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent
lighting fixtures.
Connect the unit only to a Class 2 DC power source.
Documentation CD that includes:
– Cisco IE 3000 Switch Getting Started Guide (in English, German, French, Spanish, Italian,
Japanese, and simplified Chinese)
Regulatory Compliance and Safety Information for the Cisco IE 3000 Switch
–
Regulatory Compliance and Safety Information for the Cisco IE 3000 Switch (safety warnings
translated in German)
Two power and relay connectors
RJ-45 to DB-9 console port adapter cable
North American Hazardous Location Approval
Cisco IE 3000 Switch Hardware Installation Guide
B-7