Cisco IE 3000 Series Hardware Installation Manual page 50

Chapter 2 Switch Installation
Installing the Switch
The illustrations in this procedure show how to install the switch as a standalone device. The same steps
can be used to install a switch with expansion modules on the DIN rail.
To attach the switch to a DIN rail, follow these steps.
Use a flathead screwdriver to press in the space next to the tab on each of the latches and turn the screw
Step 1
driver clockwise. See Figure 2-19.
Figure 2-19 Unlock the Switch Latch
Cisco IE 3000 Switch Hardware Installation Guide
2-24
OL-13017-01