Switch Installation
This chapter describes how to install your switch, interpret the power-on self-test (POST), and connect
the switch to other devices.
If your installation is in a hazardous environment, see
Caution
Environment"
Read these topics, and perform the procedures in this order:
•
•
•
•
•
•
•
•
•
Preparing for Installation
This section provides information about these topics:
•
•
•
OL-13017-01
for instructions.
Preparing for Installation, page 2-1
Adding Modules to the Switch, page 2-5
Installing or Removing the Compact Flash Memory Card, page 2-10
Verifying Switch Operation, page 2-11
Installing the Switch, page 2-23
Connecting Power and Alarm Circuits, page 2-32
Connecting Destination Ports, page 2-36
Connecting the Switch to the Power Converter, page 2-44
Where to Go Next, page 2-53
Warnings, page 2-2
Installation Guidelines, page 2-3
Verifying Package Contents, page 2-5
C H A P T E R
Appendix B, "Installation In a Hazardous
Cisco IE 3000 Switch Hardware Installation Guide
2
2-1