Cisco IE 3000 Series Hardware Installation Manual page 120

Installing the Switch
Step 4 Push the DIN rail latches in after the switch is over the DIN rail. See
Figure B-21
Note
Cisco IE 3000 Switch Hardware Installation Guide
B-30
Pushing the DIN Rail Latches In
If you are using a 15-mm DIN rail, rotate all the feet (see
Otherwise, rotate all the feet to the recessed positions.
can use either the 7.5-mm or the 15-mm DIN rail.
Appendix B Installation In a Hazardous Environment
Figure B-21.
Figure B-21) to the extended positions.
Figure B-22 shows the two DIN rails. You
OL-13017-01