Appendix; Installation In A Hazardous Environment - Cisco IE 3000 Series Hardware Installation Manual

Installation In a Hazardous Environment

This chapter describes how to install your switch, interpret the power-on self-test (POST), and connect
the switch to other devices when in a hazardous environment.
Read these topics, and perform the procedures in this order:
•
•
•
•
•
•
•
•
•
Preparing for Installation
This section provides information about these topics:
•
•
•
OL-13017-01
Preparing for Installation, page B-1
Adding Modules to the Switch, page B-8
Installing or Removing the Compact Flash Memory Card, page B-13
Verifying Switch Operation, page B-14
Installing the Switch, page B-26
Connecting Power and Alarm Circuits, page B-36
Connecting Destination Ports, page B-41
Connecting the Switch to the Power Converter, page B-49
Where to Go Next, page B-59
Warnings, page B-2
Installation Guidelines, page B-5
Verifying Package Contents, page B-7
A P P E N D I X
Cisco IE 3000 Switch Hardware Installation Guide
B
B-1