Cisco IE 3000 Series Hardware Installation Manual page 18

Front-Panel Description
Figure 1-8
1
Setup LED
The Setup LED displays the express setup mode for the initial configuration.
colors and their meanings.
Table 1-2
Color
Off (dark)
Solid green
Blinking green
Solid
Cisco IE 3000 Switch Hardware Installation Guide
1-8
LEDs on the Cisco IEM-3000-8FM Module
1
100BASE -FX port LEDs
Setup LED
Setup Status
Switch is configured as a managed switch.
Switch is in initial setup.
Switch is in initial setup, in recovery, or initial setup is
incomplete.
red
Switch failed to start initial setup or recovery because
there is no available switch port to which to connect the
management station. Disconnect a device from a switch
port, and then press the Express Setup button.
Chapter 1 Overview
Table 1-2 lists the LED
OL-13017-01