Cisco IE 3000 Series Hardware Installation Manual page 144

Connecting the Switch to the Power Converter
Table 2-2
Europe (International)
Color
Brown
Blue
Green/yellow
United States
Color
Black
White
Green
To prepare an AC power cord to connect to the power converter, strip the inner wire insulation to 0.25
inch (6.3 mm) ± 0.02 inch (0.5 mm). See
Figure B-42
1
Connecting the AC Power Cord to the Power Converter
Follow these steps to connect the AC power cord to the power converter.
AC power sources must be dedicated AC branch circuits. Each branch circuit must be protected by a
Caution
dedicated two-pole circuit breaker.
Cisco IE 3000 Switch Hardware Installation Guide
B-54
AC-Power Cord-Color Codes
Meaning
Line
Neutral
Earth ground
Meaning
Line
Neutral
Earth ground
Preparing the AC Power Cord
1
2
2
0.25 inch (6.35 mm)
Appendix B
Figure B-42.
0.75 inch (19.05 mm)
Installation In a Hazardous Environment
OL-13017-01