Chapter 1 Overview; Switch Models; Front-Panel Description - Cisco IE 3000 Series Hardware Installation Manual

Switch Models

Switch Models
Table 1-1
the Cisco IE-3000-8TC are the switch models, and the Cisco IEM-3000-8TM and the
Cisco IEM-3000-8FM are expansion modules that you can connect to increase the number of ports. For
instructions on how to connect the expansion modules to the switch, see the
Switch" section on page
.
Table 1-1
Switch Model
Cisco IE-3000-4TC
Cisco IE-3000-8TC
Cisco IEM-3000-8TM
Cisco IEM-3000-8FM

Front-Panel Description

This section describes the front panel and includes these sections:
•
•
•
•
•
•
The switch front panel contains the ports, the LEDs, and the power and relay connectors.
Figure 1-4
Cisco IE 3000 Switch Hardware Installation Guide
1-2
describes the switch and the expansion modules. The Cisco IE-3000-4TC and
2-5.
Cisco IE 3000 Switch Models
Description
4 10/100BASE-T Ethernet ports and 2 dual-purpose ports, each with a
10/100/1000BASE-T copper port and an SFP (small form-factor pluggable)
module slot
8 10/100BASE-T Ethernet ports and 2 dual-purpose ports
Expansion module with 8 10/100BASE-T copper Ethernet ports
Expansion module with 8 100BASE-FX fiber-optic Ethernet ports
10/100 Ports, page 1-5
Dual-Purpose Ports, page 1-5
100BASE-FX Ports, page 1-5
Power and Relay Connector, page 1-5
Console Port, page 1-6
LEDs, page 1-6
show the switch and expansion module front panels.
Chapter 1 Overview
"Adding Modules to the
Figure 1-1 to
OL-13017-01