Appendix C Cable And Connector; 100Base-Fx Ports; Sfp Module Ports - Cisco IE 3000 Series Hardware Installation Manual

Appendix C Cable and Connectors

100BASE-FX Ports

The 100BASE-FX ports use MT-RJ connectors. See
62.5/125-micron multimode fiber-optic cabling.
Figure C-3
Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments.

SFP Module Ports

The switch uses SFP modules for fiber-optic uplink ports (see
Figure
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments.
Figure C-4
OL-13017-01
Fiber-Optic SFP Module LC Connector
C-4). See the switch release notes for a list of supported SFP modules.
Copper SFP Module RJ-45 Connector
Pin Label
1 TP0+
2 TP0-
3 TP1+
4 TP2+
5 TP2-
6 TP1-
7 TP3+
8 TP3-
Figure C-3. The 100BASE-FX ports use 50/125- or
Figure C-3) and for copper SFP ports (see
1 2 3 4 5 6 7 8
Cisco IE 3000 Switch Hardware Installation Guide
Connector Specifications
C-3