Dual-Purpose Ports; Console Port; Cable And Adapter Specifications; Sfp Module Cable Specifications - Cisco IE 3000 Series Hardware Installation Manual

Cisco systems switch installation guide
Hide thumbs Also See for IE 3000 Series:
Table of Contents

Advertisement

Cable and Adapter Specifications

Dual-Purpose Ports

The Ethernet port on a dual-purpose port uses standard RJ-45 connectors.
The SFP module slot on a dual-purpose port uses SFP modules for fiber-optic and copper uplink ports.
See the switch release notes for a list of supported SFP modules.
The auto-MDIX feature is enabled by default. For configuration information for this feature, see the
switch software configuration guide or the switch command reference.

Console Port

The console port uses an 8-pin RJ-45 connector, which is described in
supplied RJ-45-to-DB-9 adapter cable is used to connect the console port of the switch to a console PC.
You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console
port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from
Cisco. For console port and adapter pinout information, see
Cable and Adapter Specifications
These sections describe the cables and adapters used with Cisco IE 3000 switches.

SFP Module Cable Specifications

Table C-1
must match the wave-length specifications on the other end of the cable, and for reliable
communications, the cable must not exceed the required cable length. Copper 1000BASE-T SFP
transceivers use standard four twisted-pair, Category 5 or greater cable at lengths up to 328 feet (100
meters).
Cisco IE 3000 Switch Hardware Installation Guide
C-4
SFP Module Cable Specifications, page C-4
lists the cable specifications for the rugged fiber-optic SFP module connections. Each port
Appendix C
Cable and Connectors
Figure C-2
shows the pinouts.
Table C-2
and
Table
Table C-2
and
Table
C-3.
C-2. The
OL-13017-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents