Cisco IE 3000 Series Hardware Installation Manual page 75

Chapter 2 Switch Installation
Do not insert the cord into the AC outlet until you have completed wiring the line, neutral, and ground
Caution
connections.
Step 1 Remove the plastic cover from the input power terminals and set it aside. See
Figure 2-43
1 Ground wire
Insert the exposed ground wire lead into the power converter ground wire connection. Ensure that only
Step 2
wire with insulation extends from the connector. See
OL-13017-01
AC/DC Power Input Terminal Block
1
Connecting the Switch to the Power Converter
Figure 2-44.
Cisco IE 3000 Switch Hardware Installation Guide
Figure 2-43.
2-49