Removing The Fork Protector; Installing The Fork Protector; Removing The Lower Triple Clamp - Husqvarna 250 XC TPI 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.7
11.8
11.9
50
V01693-11

Removing the fork protector

V01656-10

Installing the fork protector

V01656-11

Removing the lower triple clamp

–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws .
Finishing work
–
Install the front wheel.
–
1
Remove screws . Remove the clamp.
–
2
Remove screws . Take off the left fork protector.
–
3
Remove screws . Take off the right fork protector.
–
Position the fork protection on the left fork leg. Mount and
1
tighten screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs. (
–
Remove the start number plate. (
–
Remove front fender. (
–
Remove the handlebar cushion.
4
25 Nm (18.4 lbf ft)
Loctite
( p. 92)
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 47)
( p. 91)
p. 49)
p. 55)
p. 55)
.
® 243™