Checking The Rubber Grip; Additionally Securing The Rubber Grip; Adjusting The Basic Position Of The Clutch Lever - Husqvarna TC 65 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.44
11.45
11.46
68

Checking the rubber grip

401197-01

Additionally securing the rubber grip

401198-01

Adjusting the basic position of the clutch lever

M01544-12
Finishing work
–
Install the fuel tank. (
–
Install the right side cover. (
–
Install the left side cover. (
–
Mount the seat. ( p. 56)
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
» If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
Rubber grip adhesive (00062030051) (
–
Additionally secure the rubber grip. (
Preparatory work
–
Check the rubber grip. (
Main work
–
Secure the rubber grip at two locations with the retaining
wire.
Securing wire (54812016000)
Wire twister forceps (U6907854)
The twisted wire ends face away from the palms and are
bent in toward the rubber grip.
–
Adjust the basic position of the clutch lever to the size of the
rider's hand using adjusting screw
Info
Turn the adjusting screw clockwise to increase the
distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to
decrease the distance between the clutch lever and
the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not
apply any force.
Do not make any adjustments while riding.
p. 61)
p. 51)
p. 53)
p. 119)
p. 68)
p. 68)
1
.