Installing The Spark Plug; Installing The Starter Motor; Installing The Oil Filter - Husqvarna FS 450 2018 Repair Manual

17.5.31

Installing the spark plug

Installing the starter motor

17 .5.32
17.5.33

Installing the oil filter

-
Mount and tighten the spark plug using the special tool.
I
Guideline
I
Spark plug
. .
I
Spark plug wrench with link (77229172000)
-
Grease the O-ring.
-
Insert the starter motor.
I
Long-life grease (0 p. 302)
-
Mount and tighten screws
Guideline
I I
Screw, starter motor
-
Tilt the motorcycle to one side and fill the oil filter housing to
about½ full with engine oil.
-
O
Insert oil filter into the oil filter housing.
-
Lubricate the O-ring of the oil filter cover.
-
8.
Mount oil filter cover
-
Mount and tighten screws@).
Guideline
I I
Screw, oil filter cover
M10x1
10 ... 12 Nm (7.4
1
... 8.9 lbf ft)
.
(0 p. 313)
O.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
ENGINE 17
41
41
41
245