Table of Contents
Advertisement
properly seated. Clip the two handles into place. See Figure 4-6.
Step 4:
Removing a DIMM. To remove a DIMM, push both handles outward.
The memory module is ejected by a mechanism in the socket.
4.6 iRIS-2400 Module Installation (Optional)
WARNING:
The iRIS-2400 module slot is designed to install the iRIS-2400 IPMI
2.0 module only. DO NOT install other modules into the iRIS
module slot. Doing so may cause damage to the AESQ170-969.
To install the iRIS-2400 module, please follow the steps below and refer to
Figure 4-7.
Figure 4-7: iRIS-2400 Module Installation
Step 1:
Locate the IPMI module slot. Place the AESQ170-969 on an anti-
static pad.
Step 2:
Align the iRIS-2400 module with the iRIS module slot. Align the
notch on the module with the notch on the iRIS module slot.
Chapter 4
58
Installation
Advertisement
Table of Contents
