Table of Contents
Advertisement
Chapter 5
BIOS
5.1 Introduction
The BIOS is programmed onto the BIOS chip. The BIOS setup program
allows changes to certain system settings. This chapter outlines the options
that can be changed.
NOTE:
Some of the BIOS options may vary throughout the life cycle of the
product and are subject to change without prior notice.
5.1.1
Starting Setup
The UEFI BIOS is activated when the computer is turned on. The setup
program can be activated in one of two ways.
1.
Press the DEL or F2 key as soon as the system is turned on or
2.
Press the DEL or F2 key when the "Press DEL or F2 to enter
SETUP" message appears on the screen.
If the message disappears before the DEL or F2 key is pressed, restart the
computer and try again.
5.1.2
Using Setup
Use the arrow keys to highlight items, press ENTER to select, use the
PageUp and PageDown keys to change entries, press F1 for help and press
ESC to quit. Navigation keys are shown in the following table.
Key
Up arrow
Down arrow
Left arrow
Right arrow
+
-
Page Up
Page Dn
Function
Move to previous item
Move to next item
Move to the item on the left hand side
Move to the item on the right hand side
Increase the numeric value or make changes
Decrease the numeric value or make changes
Move to the previous page
Move to the next page
73
Chapter 5
BIOS
Advertisement
Table of Contents
