Module Installation; Figure 4-2: Inserting The M.2 Module Into The Slot At An Angle; Figure 4-3: Securing The M.2 Module - IEI Technology WAFER-JL-N5105 User Manual

4.4 M.2 Module Installation
To install an M.2 module, please follow the steps below.
Step 1:
Locate the M.2 module slot. See Chapter 3.
Step 2:
Remove the retention screw secured on the motherboard.
Step 3:
Line up the notch on the module with the notch on the slot. Slide the M.2
module into the socket at an angle of about 20º (Figure 4-2).

Figure 4-2: Inserting The M.2 Module Into The Slot At An Angle

Step 4:
Secure the M.2 module with the previously removed retention screw (Figure
4-3).

Figure 4-3: Securing The M.2 Module

Page 50
WAFER-JL-N5105 SBC