SEL Components [Enabled]
Use the SEL Components option to enable or disable all features of
System Event Log during boot.
Disabled
Enabled
Erase SEL [No]
Use the Erase SEL option to select an option for erasing SEL (system
event log).
No
Yes, On
next reset
Yes, On
every reset
When SEL is Full [Do Nothing]
Use the When SEL is Full option to select an option for reaction to a full
SEL.
Do Nothing DEFAULT Do nothing when SEL is full
Erase
Immediately
5.8.2
BMC Network Configuration
Use the BMC Network Configuration menu (BIOS Menu 33) to configure
BMC network parameters.
BIOS Menu 32: System Event Log
System Event Log features disabled.
DEFAULT System Event Log features enabled.
DEFAULT
Do not erase SEL
Erase SEL on next reset
Erase SEL on every reset
Erase SEL immediately when SEL is full
106
Chapter 5
BIOS