Table of Contents
Advertisement
case letter, one digit and one special character, and be at least
eight characters).
4.13 IPMI Setup Procedure (AESQ170-969-i2-R10 Only)
The AESQ170-969-i2 features Intelligent Platform Management Interface
(IPMI) that helps lower the overall costs of server management by enabling
users to maximize IT resources, save time and manage multiple systems.
The AESQ170-969-i2 supports IPMI 2.0 through the optional iRIS-2400
module. Follow the steps below to setup IPMI.
The hardware configuration of the managed system (AESQ170-969-i2) is
described below.
Step 1:
Install an iRIS-2400 module to the IPMI module socket (refer to
Section 4.6).
Step 2:
Make sure at least one DDR4 DIMM is installed in one of the DIMM
sockets. If multiple DIMMs are installed, all of the DIMMs must be
same size, same speed and same brand to get the best performance.
Step 3:
Connect an Ethernet cable to the RJ-45 connector labeled LAN2
(Figure 3-31).
Chapter 4
72
Installation
Advertisement
Table of Contents
