Table of Contents
Advertisement
DO NOT touch the pins at the bottom of the CPU. When handling
the CPU, only hold it on the sides.
To install the CPU, follow the steps below.
Step 1:
Disengage the load lever by pressing the lever down and slightly
outward to clear the retention tab. Fully open the lever. See Figure
4-1.
Figure 4-1: Disengage the CPU Socket Load Lever
Step 2:
Open the socket and remove the protective cover. The black
protective cover can be removed by pulling up on the tab labeled
"Remove". See Figure 4-2.
Chapter 4
53
Installation
Advertisement
Table of Contents
