Module Installation; Figure 4-2: Removing The M.2 Module Retention Screw; Figure 4-3: Inserting The M.2 Module Into The Slot At An Angle - IEI Technology gKINO-R1000 User Manual

4.4 M.2 Module Installation
The M.2 slot is keyed in the M position and provides mounting screw position for
2280-size or 2242-sizze M.2 module. To install an M.2 module, follow the steps below.
Step 1: Locate the M.2 module slot. See Chapter 3.
Step 2: Remove the on-board retention screw Figure 4-2.

Figure 4-2: Removing the M.2 Module Retention Screw

Step 3: Line up the notch on the module with the notch on the slot. Slide the M.2 module
into the socket at an angle of about 20º (Figure 4-3).

Figure 4-3: Inserting the M.2 Module into the Slot at an Angle

Page 54
gKINO-V/R1000 SBC