Removing Accelerators
1. Raise mower conditioner fully, shut off engine, and
remove key.
2. Engage lift cylinder lock-out valves (refer to
Engaging Locks, page
3. Remove nut (A), flange bolt (B), and cutter blade (C)
from disc.
4. Use a hex key to remove bolt (A).
5. Remove lock nut (A), accelerator (B), blade holder (C),
and hex-socket bolt (D).
169820
MAINTENANCE AND SERVICING
31).
3.1.1
Figure 4.101: Cutter Blade and Disc
Figure 4.102: Hex-Socket Bolt
Figure 4.103: Accelerator and Hardware
169
Revision A