Installing Tall Crop Divider - MacDon R113 Operator's Manual

Installing Tall Crop Divider

DANGER
Stop engine, and remove key from ignition before leaving operator's seat for any reason. A child or even
a pet could engage an idling machine.
1. Lower mower conditioner fully, shut down tractor and
mower conditioner, and remove key.
2. Open cutterbar doors.
3. Remove three bolts (A) and nuts where the deflector
(B) will be mounted.
4. Position deflector (B) on mower conditioner, and
reinstall three bolts (A) and nuts. Tighten nuts.
5. Repeat for opposite side.
6. Close cutterbar doors.
169820
OPERATION
Figure 3.114: Cutterbar Doors
Figure 3.115: Deflector and Hardware
97
Revision A