Detaching From Two-Point Hitch - MacDon R113 Operator's Manual

3.9.2 Detaching from Two-Point Hitch

CAUTION
• To prevent accidental movement of tractor, shut off engine, engage parking brake, and remove key.
• To maintain stability, always lower the machine completely. Block mower conditioner wheels before
detaching from tractor.
1. Park machine on flat level surface.
2. Lower mower conditioner onto blocks or leave mower
conditioner raised.
NOTE:
If leaving mower conditioner in raised position,
engage lift cylinder lock-out valves.
3. Shut off engine and remove key.
4. Move remote cylinder control valve lever back and forth
to relieve stored hydraulic pressure.
5. Disconnect hydraulic hoses and electrical harness.
Store hose ends and electrical connector in hose
support (A) at front of hitch as shown.
6. Pull back collar (A) on driveline, slide coupler off
tractor power take-off shaft, and rest driveline on hook
(not shown).
169820
OPERATION
Figure 3.41: Hose Support
Figure 3.42: Driveline
53
Revision A