Inspecting Cutterbar Doors; Opening Cutterbar Doors; Closing Cutterbar Doors - MacDon R113 Operator's Manual

Inspecting Cutterbar Doors

1. Ensure that door operates smoothly and lies flat when
closed. Adjust if necessary.
2. Inspect hinge pin bolts (A) and tighten if loose.
3. Check door for cracks and repair if required.
4. Check for exposed metal surfaces and surface rust.
Repair and repaint if necessary.
5. Check shield/curtain bolts (B) and replace if missing or
tighten if loose.

Opening Cutterbar Doors

1. Lift door at front to move to open position.
NOTE:
Center header beneath hitch to open both doors.

Closing Cutterbar Doors

CAUTION
To avoid injury, keep hands and fingers away from corners of doors when closing.
169820
MAINTENANCE AND SERVICING
159
Figure 4.76: Cutterbar Door
Figure 4.77: Open Cutterbar Door
Revision A