Removing Outboard Curtains - MacDon R113 Operator's Manual

3. Secure two curtain brackets (A) to center shield using
two M10 carriage head bolts (B) and nuts.
4. Torque bolts (A) to 30 ft·lbf (40 N·m).

Removing Outboard Curtains

The procedure for removing outboard curtains is the same for both sides.
1. Open cutterbar door.
Doors, page 159.
2. Remove four cap screws (A), nuts, and large washers
securing outboard curtain to endsheet.
169820
MAINTENANCE AND SERVICING
Refer to
Opening Cutterbar
Figure 4.92: Inboard Curtain Attached to
Mower Conditioner
Figure 4.93: Cutterbar Doors
Figure 4.94: Left Side Endsheet
165
Revision A