Transporting With A Truck - MacDon R113 Operator's Manual

1. Hook-up mower conditioner to tractor (refer to
Attaching Mower Conditioner to the Tractor, page
NOTE:
The hydraulic hoses (A) do not need to be
attached to the tractor for towing. Ensure they
are securely stored on the hitch.
NOTE:
The power take-off (PTO) driveline (B) does not
need to be attached for towing purposes.
2. Store driveline (B) on hook (C) (if PTO driveline is not
attached), and remove forward half (A) of driveline.
Store forward half of driveline in cab for transport.
3. Ensure that hitch safety chain is properly attached to
towing tractor. Provide only enough slack in chain to
permit turning.
4. Check local laws for width regulations and lighting or
marking requirements before transporting on roads.
5. Do NOT exceed 20 mph (32 km/h).

3.15.3 Transporting with a Truck

CAUTION
Do NOT tow with a vehicle weighing less than 7500 lb. (3400 kg). Ensure that the capacity of the towing
vehicle is sufficient to maintain control.
If towing endwise with the optional endwise transport system, refer to
to prepare the mower conditioner for transport; otherwise, refer to
page 71
Transport, page 65.
169820
OPERATION
3.8
44).
Figure 3.63: Mower Conditioner Hitch
Figure 3.64: Mower Conditioner Hitch
Converting from Field to Transport Mode,
67
3.15.1 Preparing Mower Conditioner for
Revision A