Curtains - MacDon R113 Operator's Manual

1. Pull door at top to move to closed position.
2. Ensure that curtains hang properly and completely
enclose cutterbar area.

4.5.6 Curtains

Rubber curtains are installed at the following locations:
• Inboard curtain (A) attached to the center fixed cover.
• Door curtains (B) attached to each cutterbar door.
• Outboard curtains (C) attached to each front corner.
• Top cover (not shown) on finger conditioners only.
The curtains form a barrier that minimizes the risk of thrown
objects being ejected from the cutterbar area. Always keep
curtains down during operation.
Replace the curtains if they become worn or damaged.
169820
MAINTENANCE AND SERVICING
160
Figure 4.78: Cutterbar Door
Figure 4.79: Cutterbar Doors in Closed Position
Figure 4.80: Cutterbar Curtains
Revision A