Starting Call Processing; Stopping The Call Processing Application; Starting The Call Processing Application; Reporting The Cisco Hsi Status - Cisco Signaling Interface H.323 User Manual

Starting Call Processing

Starting Call Processing
To start call processing, use the sta-callproc MML command. For more information about this
command, see

Stopping the Call Processing Application

To stop the call processing application, use the stp-softw MML command. For more information about
this command, see

Starting the Call Processing Application

To start the call processing application, use the sta-softw MML command. For more information about
this command, see

Reporting the Cisco HSI Status

To display the status of the Cisco HSI, use the rtrv-softw MML command. For more information about
this command, see

Measurements

The following sections describe two measurement categories:
•
•

System-Related Measurements

The CIagent is a Simple Network Management Protocol (SNMP) subagent. It handles the collection and
storage of the following system performance measurements:
•
•
•
•
Use the CIAGENTSCANPERIOD parameter to define the period that the CIagent polls the CPU for
utilization (see
Cisco H.323 Signaling Interface User Guide
4-2
Appendix A, "MML User Interface and Command Reference."
Appendix A, "MML User Interface and Command Reference."
Appendix A, "MML User Interface and Command Reference."
Appendix A, "MML User Interface and Command Reference."
System-related measurements
Call-related measurements
CPU occupancy
RAM occupancy
Disk occupancy
TCP usage
Chapter 3, "Provisioning the Cisco
Chapter 4
HSI").
Managing the Cisco HSI
OL-4806-01 Rev. A14