Set-Dest-State - Cisco Signaling Interface H.323 User Manual

Appendix A MML User Interface and Command Reference

set-dest-state

The set-dest-state command changes the service state of an IP link or E-ISUP signaling path to IS (in
service) or OOS (out of service).
Syntax Description IS
OOS
Examples
In the following example, the command changes the service state of an IP link signaling path to IS:
gw mml> set-dest-state:ipLink1toVscA:state=IS
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Initiating state change of ipLink1toVscA to IS
gw mml> set-dest-state:ipLink1toVscA:state=OOS
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Initiating state change of ipLink1toVscA to OOS
Related Commands Command
rtrv-dest
OL-4806-01 Rev. A14
set-dest-state:ipLink1toVscA:IS|OOS
set-dest-state:ipLink2toVscA:IS|OOS
set-dest-state:ipLink1toVscB:IS|OOS
set-dest-state:ipLink2toVscB:IS|OOS
set-dest-state:EisupPath:IS|OOS
set-dest-state:ipLinkNms:IS|OOS
In service.
Out of service.
Description
Retrieves status information about the IP links and E-ISUP signaling
path to the PGW 2200.
Cisco H.323 Signaling Interface User Guide
set-dest-state
A-33