Rtrv-Calls; Rtrv-Ctr - Cisco Signaling Interface H.323 User Manual

rtrv-calls

rtrv-calls
The rtrv-calls command displays all actively connected calls. If the time elapsed parameter is provided
(in units of minutes), calls display only if they exceed the specified time. The output includes the call
direction, time connected, calling and called address, and call reference.
Syntax Description time elapsed
Examples In the following example, the command displays all actively connected calls:
gw mml> rtrv-calls
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
CallId SrcAddr DestAddr StartTime
124 04161234567 0299598125 2000-11-27 11:25:13.259

rtrv-ctr

The rtrv-ctr command displays the measurements for a counter group.
Syntax Description
counter group
Examples In the following example, the command displays the measurements for the RAS counter group:
gw mml> rtrv-ctr:RAS
GW Signaling Interface
M
"H323-GW1:GROUP=\"RAS\",NAME=\"GK DISC ATT TOT\",VAL=10"
"H323-GW1:GROUP=\"RAS\",NAME=\"GK REG ATT TOT\",VAL=0"
"H323-GW1:GROUP=\"RAS\",NAME=\"GK REG SUCC TOT\",VAL=12"
"H323-GW1:GROUP=\"RAS\",NAME=\"GK RCV UNR ATT TOT\",VAL=100"
"H323-GW1:GROUP=\"RAS\",NAME=\"GK XMIT UNR SUCC TOT \",VAL=2000"
"H323-GW1:GROUP=\"RAS\",NAME=\"GK XMIT UNR ATT TOT\",VAL=20"
"H323-GW1:GROUP=\"RAS\",NAME=\"GK RCV UNR SUCC TOT\",VAL=10"
"H323-GW1:GROUP=\"RAS\",NAME=\""GK RLS ATT TOT\",VAL=20"
"H323-GW1:GROUP=\"RAS\",NAME=\"GK RLS SUCC TOT\",VAL=30"
"H323-GW1:GROUP=\"RAS\",NAME=\"GK INFO REPORT TOT\",VAL=40"
Related Commands Command
clr-meas
Cisco H.323 Signaling Interface User Guide
A-26
rtrv-calls[:time elapsed]
If the time elapsed parameter is provided (in units of minutes), calls display
only if they have exceeded the specified time.
rtrv-ctr:counter group
The name of an MML counter group (RAS, Q931, or H245).
2000-12-05 14:19:22
RTRV
Appendix A
Description
Resets a measurement counter.
MML User Interface and Command Reference
OL-4806-01 Rev. A14