Stp-Call - Cisco Signaling Interface H.323 User Manual

Appendix A MML User Interface and Command Reference
Examples In the following example, the command starts the call processing tracing function:
gw mml> sta-trc:Calltype=both, TraceLevel=terse, dAddress=012,CgAddress=013, log=tlog.txt,
prd=10
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Related Commands Command
stp-trc

stp-call

The stp-call command terminates a currently active call by forcing a release of the call.
Disconnect/release messages are sent in both directions.
Syntax Description callref
all
Examples In the following example, the command terminates a currently active call by forcing a release of the call
with a callref of 33.
gw mml> stp-call:callref=33
H323 Signaling Interface Thu Dec 14 16:43:54 2000
M SUCC
Stopped call 33
Related Commands Command
rtrv-calls
OL-4806-01 Rev. A14
Description
Halts the tracing currently active and closes the trace file.
stp-call:callref=x
stp-call:all
Refers to a positive integer.
Stops all calls.
Description
Displays all actively connected calls.
Cisco H.323 Signaling Interface User Guide
stp-call
A-39