Cisco Signaling Interface H.323 User Manual page 54

H.323 Stack Configuration
Table 3-8 RAS Parameters (continued)
Parameter Name
allowCallsWhenNonReg
manualRegistration
timeToLive
rasPort*
compare15bitRasCrv
maxRetries*
maxMulticastTTL
preGrantedArqUse
manualDiscovery.ipAddress
Cisco H.323 Signaling Interface User Guide
3-14
Description
If this parameter is present, it
allows calls to proceed even
if gatekeeper registration has
not been done for the
PGW 2200.
If this parameter is present,
the stack does not perform
automatic gatekeeper
registration procedures (it
waits to be driven by the
application).
The maximum time (in
seconds) that the registration
of the PGW 2200 with a
gatekeeper remains valid.
The stack reregisters
periodically.
The number of the port
receiving all RAS
transactions for the current
endpoint. Set this parameter
to 0 to allow the software to
look for the available port.
If this parameter is present, it
causes the stack to ignore the
call reference value (CRV)
MSBit in RAS messages.
Maximum number of RAS
retransmissions.
Maximum number of
multicast time to live (TTL).
Choice of direct or routed. If
direct, the pregranted
Admission Request (ARQ)
feature is used for both direct
and routed calls. If routed,
the pregranted ARQ feature
is used only for routed calls.
If absent, the pregranted
ARQ is not used.
The IP address of a known
gatekeeper with which an
endpoint might attempt to
register.
Chapter 3
Type Example
NULL Not present
NULL Not present
INTEGER(1, 65535) 400
INTEGER(0, 65535) 0
NULL —
INTEGER(1, 200) 3
INTEGER(0, 200) 3
STRING direct
STRING 10.70.54.53
Provisioning the Cisco HSI
Update Type
Immediate
Stop/Start
Immediate
Start
Immediate
Immediate
Start
Next Call
Start
OL-4806-01 Rev. A14