Appendix; Example Of An Hsi Configuration File - Cisco Signaling Interface H.323 User Manual

C
A P P E N D I X

Example of an HSI Configuration File

This appendix presents an example of an HSI configuration file.
The configuration file does not contain a complete list of all configurable items.
Note
#verified
#
# $Id: GWmain.base.conf,v 1.6 2002/09/09 15:27:10 syousaf Exp $
#
# This is the base configuration file that is concatenated to
# a file derived from questions at install time, to generate the GWmain.conf
# file, which is used by the Application GWmain.
###################################################################################
##
# LOGGING PACKAGE
#
# The Logging package determines the logging level for all defined packages.
# This is a bit mask which controls the 16 debug levels
#
Package = Logging
#
OTLogging = "ON" #Choice {ON, OFF}. Default: "OFF"
Application = 0x0000
#CallControl = 0xFF00
CallControl = 0x0000
Cisco H.323 Signaling Interface User Guide
C-1
OL-4806-01 Rev. A14