Cisco Signaling Interface H.323 User Manual page 34

Installing the Cisco HSI
Step 20 Type the installation location (see
Note
The following is an example of the screen that displays:
## Executing checkinstall script.
Modified Environment is:
-------------------------
BASEDIR=/opt/GoldWing/4.1
GWHOME=/opt/GoldWing
GWUSR=mgcusr
GWGRP=mgcgrp
GWCONF_IP="10.70.54.53"
GWCONF_PORT="1719"
GWCONF_PREFIX="0208"
GWCONF_ALIAS="cisco@OuterLondonDomain.com"
GWCONF_GKID="OuterLondon"
GWCONF_HOST_PORT=8003
GWCONF_VSC1_NAME=goliath
GWCONF_VSC1_PORT=8003
GWCONF_NODEID="H323-GW1"
GWCONF_HARDWARE="Sun Netra T1"
GWCONF_LOCATION="H323 - GW1"
-------------------------
The selected base directory </opt/GoldWing/4.1> must exist before installation is
attempted.
Do you want this directory created now [y,n,?,q]
Type y to create the version directory. The following text displays:
Step 21
Using </opt/GoldWing/4.1> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <OTTgw000> [y,n,?]
Step 22 Review the output before you continue the installation. Type y to continue. The files are installed. The
following text displays:
Installing GoldWing H323 Adjunct Processor V0.1.6 as <OTTgw000>
## Installing part 1 of 1.
/etc/init.d/CiscoGW
/opt/GoldWing/4.1/bin/GWmain
/opt/GoldWing/4.1/bin/PMmain
/opt/GoldWing/4.1/bin/mml
/opt/GoldWing/4.1/bin/msg.conf
/opt/GoldWing/4.1/bin/parse
/opt/GoldWing/4.1/etc/GWmain.base.conf
/opt/GoldWing/4.1/etc/GWmain.default.conf
/opt/GoldWing/4.1/etc/GWmain.static.conf
/opt/GoldWing/4.1/etc/H323SkeletonFileSimple.dat
/opt/GoldWing/4.1/etc/parse.exclude.list
/opt/GoldWing/4.1/etc/parse.list
/opt/GoldWing/4.1/lib/libgwMib_shlib.so
/opt/GoldWing/4.1/var/prov/active_config <symbolic link>
[ verifying class <none> ]
Cisco H.323 Signaling Interface User Guide
2-8
The installation location field is a text field typically used by network designers for
identification purposes. Entering a value in this field does not affect functionality.
Chapter 2
Table 2-2) and press Enter.
Installing and Configuring Cisco HSI Software
OL-4806-01 Rev. A14