Sta-Callproc; Sta-Softw - Cisco Signaling Interface H.323 User Manual

Appendix A MML User Interface and Command Reference
Related Commands Command
rtrv-overload

sta-callproc

The sta-callproc command starts call processing.
Syntax Description This command has no arguments or keywords.
Examples In the following example, the command starts call processing:
gw mml> sta-softw
gw mml> sta-callproc
H323 Signaling Interface Thu Dec 14 16:31:09 2000
M SUCC
Starting call processing.
Related Commands Command

sta-softw

sta-softw
The sta-softw command starts the call processing application.
Syntax Description This command has no arguments or keywords.
Examples
In the following example, the command starts the call processing application:
gw mml> sta-softw
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
The Call Processing Application is starting.
OL-4806-01 Rev. A14
Retrieve
Displays the overload status and the data values for the three provisionable
levels of overload
sta-callproc
Description
Starts the call processing application.
sta-softw
Cisco H.323 Signaling Interface User Guide
sta-callproc
A-37