Ack-Alm - Cisco Signaling Interface H.323 User Manual

ack-alm

•
•
•
•
ack-alm
The ack-alm command acknowledges that an alarm event is recognized but does not clear the alarm.
Syntax Description
alarm event
Usage Guidelines
The format of the alarm category name must be the same as the format of the alarm category name that
the rtrv-alms command displays. It is case sensitive.
Examples This example recognizes the VSC_FAILURE alarm event is recognized, but the alarm is not cleared:
gw mml> ack-alm:event=VSC_FAILURE
GW Signaling Interface
M
mml>
Related Commands Command
clr-alm
rtrv-alms
Cisco H.323 Signaling Interface User Guide
A-8
stp-call
stp-callproc
stp-softw
stp-trc
ack-alm:event=alarm event
The alarm category or the text that appears in the body of the alarm. Alarm
event names are defined in
Alarms."
2000-12-05 14:19:22
SUCC
Appendix A
Chapter 5, "Troubleshooting Cisco HSI
Description
Clears an alarm event
Displays all active alarms
MML User Interface and Command Reference
OL-4806-01 Rev. A14