Rtrv-Dest - Cisco Signaling Interface H.323 User Manual

Appendix A MML User Interface and Command Reference

rtrv-dest

The rtrv-dest command retrieves status information about the IP links and EISUP signalling path to the
PGW 2200.
The output produced by this command shows the states of the H323 signalling gateway external
interfaces to the PGW 2200s:
•
•
•
•
•
•
Examples The MML command in the following example retrieves status information about the IP links and EISUP
signalling path to the PGW 2200:
gw mml> rtrv-dest
H323 Signalling Gateway
M SUCC
gw mml>
Related Commands Command
set-dest-state
OL-4806-01 Rev. A14
IS: In Service
OOS: Out Of Service
MAN: Manual
REM: Remote
FLT: Fault
NCFG: Not Configured
VscA: ACT
ipLink1toVscA: IS
ipLink2toVscA: OOS NCFG
VscB: OOS NCFG
ipLink1toVscB: OOS NCFG
ipLink2toVscB: OOS NCFG
EisupPath: IS
Description
Changes the service state of an IP link or E-ISUP signaling path to in
service (IS) or out of service (OOS).
Thu Aug 23 01:15:32 2007
Cisco H.323 Signaling Interface User Guide
rtrv-dest
A-27