Prov-Cpy - Cisco Signaling Interface H.323 User Manual

prov-cpy

prov-cpy
The prov-cpy command activates the current provisioning session. If any client-level parsing fails
during the prov-cpy command, the system might prompt for confirmation to force the HSI to activate
the configuration (prov-cpy[:confirm]). However, we recommend that you never use prov-cpy:confirm
unless you are asked to do so by Cisco.
If client-level parsing fails, there is a severe error within the user configuration.
If the prov-cpy command fails, use the failure description and the configuration changes to determine
the error. Correct the configuration and reissue the prov-cpy command.
Please contact the Cisco TAC if you require assistance with the configuration.
Syntax Description
confirm
Examples The command shown in the following example copies the configuration changes from the current session
to the Cisco HSI:
gw mml> prov-cpy
H323 Signaling Interface Sun Jan 7 13:53:42 2001
M SUCC
Successfully activated the provisioning session.
Usage Guidelines See
associated values.
Related Commands Command
prov-add
prov-dlt
prov-ed
prov-exp
prov-rtrv
prov-sta
prov-stp
Cisco H.323 Signaling Interface User Guide
A-14
If any client level parsing fails during the data session, a confirm is needed
for the data to be activated.
Chapter 3, "Provisioning the Cisco HSI,"
Appendix A
for a list of MML names, parameter names, and their
Description
Adds a component.
Deletes a provisioned component.
Modifies a provisioned component.
Exports the current configuration of the Cisco HSI in MML
command form to a file or files.
Retrieves information about an existing provisioning session.
Establishes a provisioning session.
Terminates either a specified provisioning session or the current
provisioning session.
MML User Interface and Command Reference
OL-4806-01 Rev. A14