Rtrv-Softw - Cisco Signaling Interface H.323 User Manual

rtrv-softw

Command
Related Commands
set-overload
rtrv-softw
The rtrv-softw command displays the status of the Cisco HSI and call processing activity. The following
software states can be displayed for the Cisco HSI:
•
•
•
•
•
•
The following software states can be displayed for call processing:
•
•
•
When the Cisco HSI is in the restart pending, halt pending, or reboot pending software state, the
Note
sta-callproc command cancels the pending state.
Syntax Description This command has no arguments or keywords.
Examples In the following example, the command displays the status of the Cisco HSI and call processing activity:
gw mml> rtrv-softw
VSC H-323 Signaling Interface - H323-GW1 2000-06-20 10:04:28
M RTRV
Platform Status:
Signaling interface:
Call processing:
Cisco H.323 Signaling Interface User Guide
A-32
Description
Defines the overload handling criteria and behavior.
Not running
Starting
Active
Restart pending
Halt pending
Reboot pending
Running
Idle pending
Idle
rtrv-softw
Active
Running
Appendix A MML User Interface and Command Reference
OL-4806-01 Rev. A14