C H A P T E R 2 Installing And Configuring Cisco Hsi Software; Removing The Cisco Hsi - Cisco Signaling Interface H.323 User Manual

Chapter 2 Installing and Configuring Cisco HSI Software
•
Note
The uninstall.sh script uses the PKINST file in the version directory to determine which package name
to remove.
Caution When upgrading the Cisco HSI, you must install the security package CSC0h013 before you remove
(uninstall) the preceding version of the HSI software. If you do not, the CSC0h013 security package will
not operate. This step is not required if you are performing a fresh installation of the Cisco HSI.

Removing the Cisco HSI

To remove the Cisco HSI, complete the following steps:
Log in as root.
Step 1
Enter the following command to stop the Cisco HSI:
Step 2
# /etc/init.d/CiscoGW stop
Enter the following commands:
Step 3
# cd /opt/GoldWing
# ls -l
The following is an example of the screen that displays:
drwxr-xr-x
lrwxrwxrwx
lrwxrwxrwx
-rwxrwxr-x
Enter the uninstall command and specify the version of the software that you want to uninstall, for
Step 4
example:
# ./uninstall.sh 4.1
The following text displays:
Warning: This script will remove the package OTTgw000
Do you wish to proceed? [n] [y,n,?,q]
Type y and press Enter. The following text displays:
Step 5
Deleting generated files in /opt/GoldWing/4.1
The following package is currently installed:
OTTgw000
(sparc) 4.1
Do you want to remove this package?
OL-4806-01 Rev. A14
The system should be restarted to enable the re-initialization of the SNMP processes. The
craftsperson needs to change the user to root and issue the following UNIX command:
shutdown -i 6 -g 0 -y
To revert to a previous version of the software, manually modify the currentPM and currentGW
links in the/opt/GoldWing parent directory to point to the previous version.
7 cisco sysadmin
1 cisco sysadmin
1 cisco sysadmin
1 root other
GoldWing H323 Adjunct Processor V0.1.6
512 Jan 9 18:31 4.1
19 Jan 9 18:31 currentGW -> /opt/GoldWing/4.1
19 Jan 9 18:31 currentPM -> /opt/GoldWing/4.1
3053 Jan 9 18:31 uninstall.sh
Cisco H.323 Signaling Interface User Guide
Removing the Cisco HSI
2-13